Logicube ZClone Xi User Manual

TYPES OF OPERATIONS
Logicube ZClone™Xi User’s Manual 65
To save the settings so that the unit
boots up with the static IP address, see
Section 5.9.1 for more information on
saving and loading a user profile.
5.10.3 HTTP Proxy
If the network the unit is connected to uses an HTTP proxy server to access the Internet,
proxy settings may need to be set for to be able to update software from a network (over
the internet). This typically includes a server (or IP address), a host port, a username and
password.
5.10.3.1 Server
Tap the Server icon to set the IP address (or server name) and port of the
proxy server.
5.10.3.2 Username/Password
If the proxy server requires a username and password for authentication,
tap the Username/Password icon to set this information.
5.11 Software Update
New and improved software will be released from time to time. There are two ways to
update the software: From the web through a network connection or from a USB drive.
For the latest step-by-step instructions on how to update the software,
please read the ZX Software readme file located on the ZXi Support page
on the Logicube website at https://www.logicube.com/knowledge/zclonexi.
In-depth information on updating the ZXi software can be found in
Chapter 8: Updating/Loading/Re-loading Software.

Logicube ZClone Xi Specifications

General

Brand	Logicube
Model	ZClone Xi
Category	Disc Duplicator
Language	English