TYPES OF OPERATIONS
Logicube ZClone™Xi User’s Manual 64
5.10.2.1 Configuring a Static IP Address
DHCP is enabled by default. Some networks do not support DHCP and
require a static IP address. The steps below outline how to configure the
unit with a static IP address.
1. From the Network Interface Configuration screen (above), tap
the Type box and select STATIC then tap the OK icon. The IP
SETTINGS box should now be selectable.
2. Tap the IP SETTINGS box to manually set the IP address,
NetMask, Gateway, and DNS Server. When finished, tap the OK
icon.
To Next Page
Loading...