Logicube ZClone Xi User Manual

TYPES OF OPERATIONS
Logicube ZClone™Xi User’s Manual 59
 Hash – A hash task can be started, but no settings can be
changed. Additionally, no new task can be added, and no task
can be deleted without the Config Lock unlock key.
 Wipe / Format – A wipe / format task can be started, but no
settings can be changed. Additionally, no new task can be added,
and no task can be deleted without the Config Lock unlock key.
 Task Macro – A task macro can be started, but no settings can
be changed. Additionally, no new macro can be set or edited
without the Config Lock unlock key.
 Logs – Logs are not affected by Config Lock.
 Statistics – Since there are no settings or configurations for this
operation, it is not affected by Config Lock.
 Manage Repositories – A managed repository cannot be added,
edited, or deleted without the Config Lock unlock key.
 System Settings – This entire section cannot be accessed
without the Config Lock unlock key.
 Network Settings – This entire section cannot be accessed
without the Config Lock unlock key.
 Software Updates – This entire section cannot be accessed
without the Config Lock unlock key.
 Power Off – This entire section cannot be accessed without the
Config Lock unlock key.
The unit can still be turned off without
the unlock key by using the power
button located on the front of the unit.
5.9.2.2 Forgotten Password or Config Lock Key
If the Log File Deletion password or Config Lock key is forgotten, the ZXi
will need to be reset using the Command Line Interface (CLI). See Section
7.2 for more information on how to connect to the ZXi using the CLI.
This method will only work if the INITIAL.DB
profile does not have a Config Lock Key
saved. If the INITIAL.DB has a Config Lock
Key configured, and the password was
forgotten, contact Tech Support assistance.
Once connected to the Command Line Interface (CLI):
1. Login with the username “it” (without the quotes) and the
password “it” (without the quotes).
2. From the main prompt, type command, then press the enter key.
3. Type config then press the enter key.

Logicube ZClone Xi Specifications

General

Brand	Logicube
Model	ZClone Xi
Category	Disc Duplicator
Language	English