Logicube ZClone Xi User Manual

TYPES OF OPERATIONS
Logicube ZClone™Xi User’s Manual 44
5.4.2 Settings
Tap this icon to choose a drive to set the wipe settings. The Wipe Settings screen will
appear.
The following wipe or format methods are available: Secure Erase, Wipe Patterns, and
Format.
Each setting will be performed sequentially. For example, if Secure
Erase is set to ON, a Wipe Pattern mode is specified, and Format
is set to ON, the unit will first secure erase the drive, then wipe the
drive according to the mode specified, then format the drive.
5.4.2.1 Secure Erase
Choose ON to Secure Erase the selected Target drive(s). Most drives
support this function. Secure Erase will send a command to the drive
instructing it to reset itself to the specifications the drive manufacturer
has set.
Secure erase will not work on drives connected through
the USB ports.
For SAS (Serial Attached SCSI) drives, Secure Erase sends
a ‘Format’ command. For SATA (Serial-ATA) drives,
Secure Erase sends a ‘Security Erase Unit’ command. For
SATA drives that support ‘Enhanced Security Erase Unit’
commands, the enhanced command will be sent. For
questions on how each drive supports these features, or
what the drive will do with these commands, please
contact the drive manufacturer.

Logicube ZClone Xi Specifications

General

Brand	Logicube
Model	ZClone Xi
Category	Disc Duplicator
Language	English