Logicube ZClone Xi User Manual

TYPES OF OPERATIONS
Logicube ZClone™Xi User’s Manual 46
5.4.2.2.2 HPA/DCO
The HPA/DCO button will open the HPA/DCO option for
wiping. If the drive to be wiped has HPA and/or DCO
that needs to be wiped, select Yes for the corresponding
option.
5.4.2.2.3 LBA
By default, this is set to 100% which will wipe all Logical
Block Addresses (LBAs) and will wipe the entire drive
(100%). The LBA count can be adjusted by tapping the
edit icon.
5.4.2.2.4 PASSES
This Wipe Setting will change depending on the Wipe
Pattern Mode selected.
 If None was selected, this is not selectable.
 If DoD was selected, all 7 passes will be pre-
filled. Users can edit the pass values by tapping
the edit icon. The default values are: 00, 01, 00,
FF, F6, 00, XX (random).
 If Custom was selected, one pass will be pre-
filled with a random value. Users can edit the
pass values if desired by tapping the edit icon.
The default value for a custom pass is 00.
Editing one or more of the passes in DOD or CUSTOM
mode will bring up this screen:
 SKIP – Instructs the unit to skip the pass.
 RANDOM – Writes one random hexadecimal
value (from 00 - FF) to all the selected Logical
Block Addresses.

Logicube ZClone Xi Specifications

General

Brand	Logicube
Model	ZClone Xi
Category	Disc Duplicator
Language	English