Logicube ZClone Xi

OPTIONS
Logicube ZClone™Xi User’s Manual 75
8.4.1 PCIe Bridge Overview
DRIVE LEDs (USB 3.0, PCIe, SATA) – For USB, PCIe, and SATA
 On – Detects a drive connected on the corresponding port
 Blinking – Detects activity on the corresponding port
 Off - No drive is detected on the corresponding port
HOST – Detects a link connection between the PCIe Bridge and the ZClone Xi
 On – Detects an active link between the PCIe Bridge and the ZClone Xi
 Off – There is no active link between the PCIe Bridge and the ZClone Xi
ALERT – HPA and/or DCO detection
 On – Detects the presence of an HPA and/or DCO on the connected drive
 Off – Does not detect the presence of an HPA and/or DCO on the connected
drive
POWER – Power LED
 On – The PCIe Bridge is powered on
 Blinking – This LED will blink while the PCIe Bridge is being turned ON or OFF
 Off - The PCIe Bridge is turned off