TYPES OF OPERATIONS
Logicube ZClone™Xi User’s Manual 56
5.9 System Settings
System Settings screen allows users to configure several different settings which
include: Profiles, Passwords, Language/Time Zone, Bay Roles.
5.9.1 Profiles
Do not highlight and save over the INITIAL.DB
profile. This is the default profile of the unit and is
used to reset the unit to the factory default settings.
This screen shows all user profiles. The following selections are available in this screen:
New – Allows the user to create a new profile name.
Save – Saves the selected profile.
Load – Loads the selected profile.
The unit will boot with the
profile that has an asterisk
(*) next to the name.
The Profiles tab allows users to create, save, and load different profiles with different
configurations. When a profile is loaded using the Load icon, the unit will load that profile
during its boot process.
For example, if the user wants the unit to always boot up with the default Clone mode of
Image to Drive:
To Next Page
Loading...