DEFAULT PASSWORDS
Logicube ZClone™Xi User’s Manual 86
6. Next, type the following command:
sudo smbpasswd it
7. The following prompt will appear:
New SMB password:
8. Type the same password you used in step 5 above. The following prompt will appear:
Retype new SMB password:
9. Type the same password again, then press the Enter key. The Logicube prompt should appear.
10. Type the following command then press the Enter key:
sudo mount -o remount,ro /
11. Press the following key combinations to go back to the Graphical User Interface: Alt+1
To Next Page
Loading...