EasyManua.ls Logo

Lonking CDM853 - 1.5 SAFETY PRECAUTION OF OPERATION

Lonking CDM853
153 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
1.4.16
1.4.16
1.4.16
1.4.16 PROTECTION
PROTECTION
PROTECTION
PROTECTION FROM
FROM
FROM
FROM FALLING
FALLING
FALLING
FALLING OR
OR
OR
OR FLYING
FLYING
FLYING
FLYING OBJECTS
OBJECTS
OBJECTS
OBJECTS
When operating, the engine coolant temperature
and pressure are high. All pipelines leading to
radiator or engine has hot water and steam,
touch them will cause serious burn.
When checking coolant level, the engine should
be shut down and add cold water to let it cool
until the bare hands can be used to open the
outlet cover.
Slowly screw the filler cap of cooling system to
release pressure.
Because the coolant of cooling system containing
alkali, it is forbidden to contact with skin or eyes
and drink.
Cool the coolant before exhausting it.
When there is falling or flying objects hit the cab
at site, it will cause danger, please select the
protective device that is suitable to operating
condition to protect driver.
When working at mines, tunnels, deep pit, soft or
wet surface, it may exist hitting danger of falling
rocks or flying objects. It is necessary to install
protective devices in the cab, and the installation
must comply with the requirements of FOPS
(fallin g objects protective devices) and glass
protection.
Prohibit the use of strengthening devices, such
as drilling and welding on the protective device.
If the protection device is seriously impacted or
damaged, its strength is lowered and its normal
functions cannot be reached, please contact the
designated dealer of LONKING Holdings Limited
for consultation repair method.
When using breaker for operation, install a
protective device on the front windshield. Please
contact the designated dealer of LONKING
Holdings Limited for recommendations.
If any glass of the machine is damaged, please

Table of Contents