What causes a tip not removed error on Lonza Laboratory Equipment?
If your Lonza Laboratory Equipment is showing a 'Tip not removed' error, it could be due to a wet or unclean cone or an incorrectly mounted DiTi adapter. Clean the DiTi cone and check the correct installation of the DiTi adapter.
Why are several pipetting channels leaking on Lonza PyroTec PRO Laboratory Equipment?
If several or all pipetting channels are leaking on your Lonza Laboratory Equipment, it could be due to using the wrong DiTis, tip cone seals, or gaskets, or the DiTis are not picked up properly. Only use DiTis, tip cone seals, or gaskets provided by Lonza. Check the carrier positions.
Provides details about the manufacturer and their address.
Defines intended and improper uses of the PyroTec™ PRO.
Details the product's compliance with applicable EC Directives.
States the product's certification by the Canadian Standards Association.
Outlines FCC regulations applicable to the PyroTec™ PRO.
Explains the significance of safety symbols and warning notices.
General principles for product safety and user precautions.
Details hazards related to instrument operation and necessary safety measures.
Specifies the qualifications and training needed for operating personnel.
Describes the safety features and elements of the instrument.
Provides overarching safety rules for instrument operation and care.
Details product identification labels and their meanings.
Introduces key system modules like Air LiHa and RoMa.
Details chemical resistance of materials used in the instrument.
Describes the overall structure and components of the instrument.
Details functions of Air LiHa, MultiSense, and RoMa arms.
Explains Capacitive Liquid Level Detection and Clot Detection.
Guidance on preparing the installation site and system.
Instructions for safely unpacking the instrument.
Steps for installing and connecting the instrument and its options.
Procedures for installing optional system modules and accessories.
Instructions and warnings for transporting the instrument.
Details on how to package the instrument for transport or storage.
Identifies and explains operating elements and display indicators.
Outlines the different modes for operating the PyroTec™ PRO.
Provides safety instructions and procedures for routine operation.
Guidance on operating in process definition and validation modes.
Lists necessary tools, consumables, and cleaning agents.
Outlines periodic maintenance tasks based on frequency.
Details maintenance procedures for specific components like tips and waste units.
Describes tests for verifying instrument performance.
Provides guidelines for decontaminating the instrument.
Lists common problems, their causes, and corrective measures.
Detailed instructions for resolving specific issues like Z-brake and alignment.
Steps for safely shutting down the instrument.
Guidelines and precautions for transporting the instrument.
Recommendations for storing the instrument.
Guidelines for disposing of operating materials and waste.
General instructions and regulatory information for instrument disposal.
Lists available software and documentation for the instrument.
Lists basic accessories included with the instrument.
Lists necessary tools and gauges for operation and maintenance.
Details optional system modules and accessories for LiHa and RoMa.
Lists carriers for reagents, troughs, and disposable tips.
Provides contact details for technical support and service.
General| Sample Capacity | 96-well microplates |
|---|---|
| Wavelength | 405 nm |
| Temperature Control | Yes |
| Capacity | 96 wells |
| Power Supply | 100-240 V, 50/60 Hz |
To Next Page
