Using the System
32
Using the System
You can now begin to explore the main menu of your system.
Configuration
BUZZER
Check the boxes to turn system beep,
alarms, and buzzer sounds on/off.
• KEY BEEP – Beeps when you click the
mouse or press buttons on the remote
control.
• VIDEO LOSS – Alarm sound when video
signal is lost from a camera.
• ALARM IN – Alarm sound for connected
external security alarm.
• MOTION DETECT – Alarm sound whenever
motion is detected.
Click OK to save your settings, or click
DEFAULT to restore factory defaults.
PASSWORD SETUP
Set password for the various users of the
System. The system has a total of ten
users:
o 1 Administrator (Admin)
o 3 Managers
o 6 Users
To change your password:
1. Click
◄► to select the USER. The
Virtual Keyboard opens.
2. Using the Virtual Keyboard, enter the
current password for that user.
3. Enter a new password.
4. Re-enter the new password to
confirm and click OK.
See Using the Virtual Keyboard for more
details on using the Virtual Keyboard.
Note: The password has a maximum
length of ten digits.
Open the Configuration menu from the System
Control Panel to adjust various system settings.
To Next Page
Loading...
Need help?
General