L19WD Series
25
Time Stamp
When you change the date and time after recording video data. A pop-up window appears
informing you that the recorded video before the time change will keep the original time stamp.
The same applies for changes to Daylight Savings Time (DST).
Turning the monitor off
• From the front panel, press and hold the MENU button
for 3 seconds.
• The system continues to record while the monitor is shut
off. LED lights remain lit on the front panel. This useful to
disguise the fact that the system is a security monitor.
• Press the MENU button again to turn the monitor back on.
Note: Only pressing the MENU button will turn the
monitor back on.
To Next Page
Loading...
Need help?
General