L19WD Series
51
To enable Email Notification using your
own email provider:
1. Uncheck the DEFAULT SERVER box
to use your own email provider.
2. Check the EMAIL NOTIFICATION box.
3. Enter your ISP’s SMTP server
information, along with your username
and password for your email account.
Note: You can obtain this information
from your email application or by
contacting your Internet Service
Provider
.
4. Enter 25 in the PORT field.
5. Enter the subject heading (Title), From,
and To information for the email
notification in the fields.
6. Change the Event Count and
Frequency if desired.
7. Check the boxes for MOTION,
ALARM, VIDEO LOSS, or PANIC to
set which event types you wish to send
email notifications.
8. Click CHECK SERVER to test if your
SMTP server information is correct.
Click OK to save your settings or DEFAULT to
restore factory defaults.
To Next Page
Loading...
Need help?
General