Piccolo 20 from 82
www.lt-light.com
Editing level for the selection (in the example for the channel 1):
[CHANNEL] [1] [@] [#][#] level is entered with 2 digits, from 00 to 99
[CHANNEL] [1] [@] [@] level 100% or full (FF)
[CHANNEL] [1] Encoder level in continuous mode
[CHANNEL] [1] [3.B]↑↑ (or [2.B]↓↓) Increase de dimmer at % (or decrease)
*Piccolo Scan has these functions, [2.B]↓↓ & [3.B]↑↑, as direct key function: [↓↓] & [↑↑]
13.2.1. LEVEL 00 & NO-SELECTION
A channel at 0% is a channel not-selected. A level 00 can be obtained:
Channel by channels, moving down each fader, at their lowest position.
For the last selected channels, press [@] [0] [0] or [3-B]
HOME
*
*Piccolo Scan has [HOME] key dedicated.
For the last selected channels, press [RST]
For all the channels edited, press [RST] [RST]
13.2.2. OTHERS EDITING COMMANDS
Piccolo has others command & functions keys to help in edition:
[.] To repeat the last channels selection (selection done by keyboard) or to repeat
the last level entered by keyboard. The commands:
[CHANNEL][.] To repeat the last channels selected
[@][.] To repeat the last level entered
[THRU] [THRU] Command to select the scene (any channel over 0%):
[CHANNEL] [THRU][THRU] Select all channels in scene.
[ENTER] To end a selection command. In this case the next command is the same:
[CHANNEL] [1] [CHANNEL] [3]… & [CHANNEL] [1] [ENTER] [3]…
[1-B]NEXT To select the next channel after the last selected channel… very useful for
quick selection. In example, the selection of odd channels from channel 11:
[CHANNEL] [1] [1] [NEXT] [NEXT] [ENTER] (channel 13)
[NEXT] [NEXT] [ENTER] (channel 15)
[NEXT] [NEXT] [ENTER]… (channel 17…)
*Piccolo Scan has [NEXT] key.
[2-B]SHAPE To edit a dynamic level of channels and/or parameters. See SHAPES (FOR
CHANNELS & FIXTURES), pg-45.
*Piccolo Scan has [SHAPE] key.
13.2.1. LEVELS EDITION OF 0-255
Piccolo has a command to edit a level value in scale 0-255, with whole precision. To edit a cannel
with a value in scale 0-255, press:
[CHANNEL] [#] [@][OPTIONS] [#][#][#], with the last 3 numbers as desired value in scale 0-
255.
To Next Page
Loading...