EasyManua.ls Logo

LTI TX4 - Fuel Cut off Switch; Instrument Panel Illumination; Horn; Door Mirrors

LTI TX4
95 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DRIVER’S COMPARTMENT -
INSTRUMENTS AND CONTROLS
22
Fuel cut off switch
In the event of an accident the inertia switch will
disable the fuel system. To re-activate, locate
the switch (A) mounted up and behind the driver
side fascia. Once operated the engine can be
re-started in the usual manner.
Instrument panel illumination
When the side lights are switched on, the
instruments and a number of the switches are
illuminated. The intensity of the instrument
illumination may be controlled by rotating the
knurled adjuster (B).
Horn
The horn may be operated by pressing the lower
part of the steering wheel centre pad.
Door mirrors
Turn the knob (C) to select the mirror to be
adjusted. Adjust the mirror by moving the knob
in the direction adjustment is required. Return
the control to its central position when the
required adjustment has been achieved.
To clear mist and frost, the mirrors are heated
when the rear screen heater is in operation.
Note: To minimise accidental damage, door
mirrors are designed to fold back if they are
inadvertently knocked. They may be
repositioned by pulling the mirror head back into
its normal position.
WARE 164
WARE 158
B
C
WARE 399
A

Table of Contents