LTI TX4 - Arming and Disarming the System

VEHICLE LOCKING & SECURITY
6
Arming and disarming the system
To lock the vehicle and arm the security system,
close the windows, vacate the vehicle and
ensure the doors, bonnet and boot lid are fully
closed before pressing the remote key button
(A) while adjacent to the vehicle. The light (B) in
the key will illuminate to confirm the key is
operating.
The hazard lights will flash once and any door
operated interior lights will go out.
If any door or the boot is open, hazard lights will
flash 5 times and the central door locking will
not operate.
To unlock the vehicle press the button (C) on
the remote key. The hazard lights will flash
twice, the doors will unlock and the interior
lights will come on.
WARE 395
B
A
C