MAINTENANCE REQUIREMENTS
64
BODY LUBRICATION
Locks hinges and catches
Inject a small quantity of thin oil through the
front door and boot lock key slots.
CAUTION: Never lubricate the
steering lock.
Apply light oil to the moving parts of the door,
bonnet, and boot hinges. Grease the bonnet
release mechanism and safety catch.
Jack
Occasionally remove the jack and check its
operation. Apply grease to the jack screw to
ensure it will operate correctly when required.
BODY CARE AND CLEANING
LTI Vehicles Dealers carry a wide range of
vehicle care products which have been chosen
because of their excellent performance in
maintaining the appearance of the vehicle in
service.
Interior
• Regularly vacuum or brush off the seats.
Clean stubborn marks with diluted upholstery
cleaner following the instructions on the
container. Avoid a rubbing action when
cleaning upholstery.
• Clean seat belts and head lining by sponging
with warm water, using a non detergent soap.
Never use cleaners incorporating bleaches,
dye chemical cleaners or detergents on seat
belts as this will affect their performance
characteristics adversely. Allow seat belts to
dry naturally.
• Clean carpets with a brush or vacuum
cleaner. Occasionally clean carpets with
diluted upholstery cleaner. Rubber mats
should be cleaned with water.
• Clean the windows with a clean soft cloth and
glass cleaner, or chamois leather. The rear
screen should always be cleaned with care.
To avoid damage to the heating elements,
cleaning should be in line with and not across
the heating wires.
• Clean the acrylic screen of the centre division
with a dilute solution of liquid dish washing
soap. Do not use glass cleaners on acrylic
surfaces.
• Clean trim panels with a soft damp cloth.
Remove stubborn marks with fascia and
bumper cleaner.
To Next Page
Loading...