Lucent Technologies -48V CPS4000/CPS4000 PLUS Cabinet Power System
Issue 13 December 2000 Product Description 2 - 15
Plug-in Distribution Modules
Introduction CPS offers three plug-in distribution modules, ES610, ES611, and
ES613, which can eliminate the need for separate distribution protection
panels and save cabinet space. The distribution modules require 1-inch
of space above for wiring. All three modules plug into one power
module slot.
ES610 The ES610 module provides twelve primary bus outputs protected by
GMT-type fuses. The number of fuse modules used in a system is not
restricted; however, the total output per module is restricted to 25
amperes. A DIP switch is provided that allows the user to assign groups
of four fuses as either minor or major power alarms.
ES611 The ES611 module provides six primary bus outputs; four are protected
by 3-30A circuit breakers and two are protected by GMT-type fuses.
The total output of the ES611 should be restricted to 30 amperes; but, as
with the ES610, the number of modules used in a system is not
restricted. Both tripped circuit breakers and blown fuses result in a
power major alarm.
ES613 The ES613 module provides twelve ringer outputs protected by
GMT-type fuses. Blown fuses result in a power major alarm.
ES610 or ES613 ES611
Power
PMJ
Plug-In Distribution
Power
PMJ
Plug-In Distribution
To Next Page
Loading...
