Lucent Technologies -48V CPS4000/CPS4000 PLUS Cabinet Power System
4 - 6 Safety Issue 13 December 2000
Warning Statements and Safety Symbols, continued
This symbol is used to identify the
presence of a hot surface. It may
also be accompanied by a
statement explaining the hazard. A
symbol like this with a lightning
bolt through the hand also means
that the part is or could be at
hazardous voltage levels.
This symbol may also be used to
identify the presence of a hot
surface. The marked item should
not be touched without taking
care.
This symbol is used to identify the
protective safety earth ground for
the equipment.
This symbol is used to identify
other bonding points within the
equipment.
This symbol is used to identify the
need for safety glasses and may
sometimes be accompanied by
some type of statement, for
example: “Fuses can cause arcing
and sparks. Risk of eye injury.
Always wear safety glasses.”
To Next Page
Loading...
