Lucent Technologies DDM-2000 OC-12 - Page 1017

NTP-010 363-206-295OrderCircuit:
1997December1,Issue4of2Page
LISTEDORDERINBELOWITEMSDO .... TOGODETAILS,FOR
depressMomentarily UPD/INIT onpushbutton SYSCTL
(CIT)terminalinterfacecraftuseor upd tocommand
nodes.terminatingOC-12DDM-2000update
3.
Use set-state-oc3: alarmdisabletocommand
thelooporpairlineOC-3/IS-3specifiedtheofmonitoring
OC-3/IS-3 OLIUs.
4.
ororderworktheFrom rtrv-crs-sts3c command,
beingcircuitforcross-connectionsthedetermine
theUsediscontinued. rtrv-crs-sts3c atcommand
theobtaintonetworkringtheinnodeeach STS-3c
ReportConnectCross .
5.