Lucent Technologies DDM-2000 OC-12 User Manual

SET-DATE 2of1Page SET-DATE
NAME
TimeandDateSetset-date:
FORMATINPUT
set-date:[date= Date ][,time= Time ];
DESCRIPTION
thecorruptwillcommandthisExecutingtime.anddatethesetscommandThis
bins.(PM)performance-monitoringdayandhourquartercurrent
!
CAUTION:
anIf apply (executionforschedulediscommand action =install),
the set-date programbeforeissuedbeNOTshouldcommand
untilwaittoadvisedisuserThecompleted.andinvokedisinstallation
reset.issystemtheandcompletedisinstallationprogram
1:NOTE
thisthenshelf,aonportDCCorCITanyonenabledissecurityIf
onportsDCCorCITallforonlyusersprivilegedtoavailableiscommand
shelf.the
2:NOTE
processrecoverytimeanddateautomaticanreset,shelfaofeventtheIn
connectedshelfremotethefromtimeanddatethereadingbyplacetakes
ringInapplications).linear(inshelflocaltheofinterfacemain-btheto
shelfremotethefromrecoveredisdatatimeanddatetheapplications,
ringandlinearbothInshelf.localtheofMain-b-1toconnected
tosetaretimeanddatebothfails,recoveryautomatictheifapplications,
(default 70-01-01 anddatefor 00:00:00 time).for
are:parametersinputThe
date ofdigitstwolasttheisYYwhereYYMMDD,digitssixasenteredisDate
currenttheisDefaultday.theisDDandmonth,theisMMyear,the
day.system
time MM(00-23),hoursisHHwhereHHMMSS,digitssixasenteredisTime
currenttheisDefault(00-59).secondsisSSand(00-59),minutesis
time.system
OC-12DDM-2000 1997December1Issue 11-241

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English