Lucent Technologies DDM-2000 OC-12 User Manual

SET-ATTR-ALM 2of1Page SET-ATTR-ALM
NAME
AttributeAlarmSetset-attr-alm:
FORMATINPUT
set-attr-alm[:almdel= AlarmDelay ][,clrdel= ClearDelay ][,pmn= PMN ];
DESCRIPTION
delays.clearandholdoffalarmthesetscommandThis
are:parametersinputThe
almdel failures.equipmentandsignalincomingfordelaytheisAlarmDelay
anbeforepresentisconditionfaultathattimeofintervalansetsIt
awith30,and0betweenseconds,inisdelayThedeclared.isalarm
2.ofvaluedefault
NOTE:
intervalrecoverytheexceeded,isthresholddegradesignalaIf
thethanlongerbemayconditiondegradesignalthefor
Forresult.willalarmananddelay,holdoffprovisioned
20ofdelayalarmanwithinterfaceOC-3ansupposeexample,
10ofthresholddegradesignalaandseconds
-6
signalahas
aforintervalrecoverytheSinceseconds.10offailuredegrade
10
-6
theoflengthtotaltheseconds,15isthresholdrateerror
ofseconds15plusfailureofseconds(10conditionalarm
20ofdelayalarmprovisionedtheexceedwillrecovery)
declared.bewillalarmanandseconds,
clrdel betodeclaredbecanalarmanbeforetimeindelaytheisClearDelay
andAIS(includingfailuressignalandfailuresequipmentForclear.
failurealarmthewhenbeginsintervaltimedelaycleartheFERF),
30and0betweenisdelaythefailures,equipmentForclears.
clearfailures,signalForseconds.15ofvaluedefaultawithseconds,
seconds.15atfixedisdelay
pmn (minoreitherbecanwhichlevel,alarmMinorPowertheisPMN MN)
(majoror MJ Minor.isdefaultThe).
OC-12DDM-2000 1997December1Issue 11-235

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English