Lucent Technologies DDM-2000 OC-12 User Manual

SET-FECOM 4of1Page SET-FECOM
NAME
CommunicationsFar-EndSetset-fecom:
FORMATINPUT
set-fecom: Address [:com= Communications ][,nsus= NS/US ]
[,lanreset= lanreset ];
DESCRIPTION
datasectiontheovercommunicationdisablesorenablescommandThis
overheadembeddedanisDCCALAN.IAOor(DCC)channelscommunication
communicationsend-to-endforusedlineSONETtheinchannelcommunications
informationstatusandcontrol,alarm,carriesDCCThemaintenance.and
(NEs).elementsnetworkbetween
NOTE:
only.usersprivilegedtoavailableiscommandThis
isitifsuccessfullycompletewillcommandthis7.0,ReleasewithStarting
session.loginremoteaduringexecuted
are:parametersinputThe
Address LAN.IAOorDCCtheofaddresstheidentifiesAddress
video):or(0x1AddressesDCCRingValid dcc-all,
dcc-{mb1,mb2,a1,a2,b1,b2,c1,c2,d1,d2}
(1+1):AddressesDCCRingValid dcc-all,
dcc-{mb1,mb2,a,b,c,d}
Addresses:DCCOC-1Valid dcc-all,
dcc-{m,a,b,c}{1,2}-{1,2,all}
Address:LANIAOValid lan
later)and7.0(Release
com aovercommunicationwhetherindicatesparameterThis
7.0ReleaseOC-12(forinterfaceLANIAOorDCCspecified
validThedisabled.orenabledisreleases)TARPlaterand
arevalues enabled or disabled isvaluedefaultThe.
enabled.
DCC-all,perenabled/disabledbemustCommunication
anAsDCC.specificorLAN.IAOorDCC,specific
DCCsomeovercommunicationpoint,someatexample,
theatenabledbetohavemightLANIAOtheandchannels
abothovercommunicationenabletoorderIntime.same
willcommandthisinterface,LANIAOandchannelDCC
communicationenabletooncetwice;executedbetohave
11-248 1997December1Issue OC-12DDM-2000

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English