SET-T3 4of1Page SET-T3
NAME
CharacteristicsT3Setset-t3:
FORMATINPUT
set-t3:
Address
:[md=
Mode
][,ais=
AlarmIndicationSignal
][,alm=
AlarmLevel
]
[,fth=
FailureThreshold
][,pmmd=
PMMode
][,frame=
Frame
][,fmt=
Format
];
DESCRIPTION
!
CAUTION:
service.affectmaycommandthisofExecution
ports.DS3moreoroneofparameterscharacteristicthesetscommandThis
andconditions,AISthresholds,failurelevels,alarmincludecharacteristicsThese
monitoring.performance
are:parametersinputThe
Address
orOneprovisioned.betoport(s)DS3theofaddresstheisAddress
specified.bemayportsall
Addresses:PortDS3Valid {a,b,c,d}-{1-3,all},all
md signal.DS3theofmoderemovalmonitorviolationtheisMode
values:followingtheofonehavemayparameterThis
vmr value).(defaulterrorsbitPDS3removeandMonitor
vm errors.bitPDS3removenotdobutMonitor
cc bitPDS3removeormonitornotDo—channelClear
errors.
tosetisparameterthisIf vmr or vm the, ais notwillparameter
for.promptedbe
tosetisparameterthisIf cc the, pmmd, frame and, fmt
thecase,thisinAlsoused.benotwillparameters pmmd, frame,
and fmt currentThevalues.currenttheirkeepwillparameters
thewhetherusedbetoavailablebewillparametersbothforvalues
ofvalue md tosetis vm or vmr.
ais shouldAISDS3anotorwhetherdeterminesAlarmIndicationSignal
bemayvalueTheinserted.be yes or no tosetisAISWhen.
yes:
anofdetectionuponDSX-3thetowardsinsertedisAISDS3—
fromincomingAISpathSTSorsignaloflossOC-12orOC-3
fiber.the
OC-12DDM-2000 1997December1Issue 11-315
To Next Page
Loading...
Need help?
General
