Lucent Technologies DDM-2000 OC-12 - SET-STATE-Sts3 C

SET-STATE-STS3c 2of1Page SET-STATE-STS3c
NAME
ChannelsSTS-3cofStateSetset-state-sts3c:
FORMATINPUT
set-state-sts3c: Address :ps= PrimaryState ;
DESCRIPTION
offandonturntousedisItchannels.STS-3cofstatesthesetscommandThis
channels.specifiedforsignalsmaintenanceandfailuressignalofmonitoringthe
releases.ringOC-12inavailableiscommandThis
are:parametersinputThe
Address channel(s).STS-3ctheidentifiesAddress
are:addressesValid {mb}-{1,4,7,10,all}.
droppedarethatchannelsSTS-3cforsetbecanstatesChannel
OC-3ctointerfacespeedhighOC-12anfrom(non-terminated)
slots.unitfunctiontheininterfaces
ps theofonehavemaywhichstatechanneltheisPrimaryState
values:following
auto theMonitorautomatic.tostatechanneltheSet
conditions.statusoralarmreportnotdobutchannel,
changeautomaticallydetected,issignalgoodaWhen
normalbeginandin-servicetostatechannelthe
conditions.statusandalarmofreporting
nmon reportnotDomonitored.nottostatechanneltheSet
notDochannel.theforconditionsstatusoralarm
issignalgoodaifin-servicetostatechannelthechange
theuntilstatethisinremainwillchannelThedetected.
theuntilorcommandthiswithagainchangedisstate
(ringdeletedischannelthisinvolvingcross-connection
releases).
OC-12DDM-2000 1997December1Issue 11-299