Lucent Technologies DDM-2000 OC-12 User Manual

SWITCH-PATH-STS1 4of1Page SWITCH-PATH-STS1
NAME
STS-1PathSwitchswitch-path-sts1:
FORMATINPUT
switch-path-sts1: Address :pri= Priority ;
DESCRIPTION
ringprotectedpathonswitchingpathSTS-1controlscommandThis
(one-way).unidirectionalalwaysisswitchingPathconfigurations.
are:parametersinputThe
Address carryingcurrentlychannelSTS-1theofaddresstheisAddress
iscommandthisWhentraffic.continueanddropordropped
thetopaththisfromawayswitchedbewilltrafficexecuted,
parameter.thisfordefaultnoisTherering.theonpathother
ring0x1theforprovisionedunitfunctionatodropsthatTraffic
switched.becannotapplicationvideoor
Addresses:OC-12Valid mb{1,2}-{1-12,all}
pri request.switchprotectiontheofprioritytheindicatesPriority
isvaluevalidonlyandoneThe manual arequestsThis.
aunlesspathstandbythetopathaddressedthefromswitch
standbytheonexistsdegradesignalpathorfailsignalpath
path.
NOTE:
low-speedatodroppedsimultaneouslyispathcontinueanddropA
through.passedandinterface
STS-1theorequippednotiscommandtheinspecifiedaddresspaththeIf
thecross-connected,continueanddroporadd/drop,drop,notischannel
message:followingthewithdeniedbewillcommand
SVNS
/*etatSdilaVnitoN,sutatS*/
etcennoc-ssorcro/dnadeppiuqetonsihtapdeificepsehT*/ /*.d
11-326 1997December1Issue OC-12DDM-2000

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English