Lucent Technologies DDM-2000 OC-12 User Manual

SET-STATE-EC1 2of1Page SET-STATE-EC1
NAME
StatePortEC-1Setset-state-ec1:
FORMATINPUT
set-state-ec1: Address :ps= PrimaryState ;
DESCRIPTION
iscommandThisports.EC-1speedlowtheofstatethesetscommandThis
port.specifiedafromfailuressignalofmonitoringtheoffandonturntoused
are:parametersinputThe
Address port(s).EC-1theidentifiesAddress
Addresses:Valid {a,b,c,d}-{1-3,all}all,
ps followingtheofonehavemaywhichstateporttheisPrimaryState
values:
auto theatsignalgoodformonitoredbetostateSet
port.specified
nmon monitored.nottostatememorySet
NOTE:
theinisportaIf nmon thetoreturnedbemustitstate, auto usingstate,
becanportthatwithassociatedpackscircuitanybeforecommand,this
thebylistequipmentthefromremoved upd command.
ofstateprimaryaIf nmon displayed:bewillmessagefollowingtheentered,is
)s(troP*/ sserdda /*etatssihtnidemralaroderotinomebtonlliw
11-292 1997December1Issue OC-12DDM-2000

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English