Lucent Technologies DDM-2000 OC-12 User Manual

SET-NE 3of1Page SET-NE
NAME
ElementNetworkSetset-ne:
FORMATINPUT
set-ne:tid= TID [,shelf= Shelf ][,cort= CO/RT ]
[,idle= IdleChannelSignal ];
DESCRIPTION
NOTE:
theoffunctionalitythedescribespagecommandThis set-ne command
releases.TARPOC-12laterand7.0ReleaseOC-12in
aof(parameters)characteristics(NE)elementnetworkthesetscommandThis
DDM-2000.
NOTE:
thisthenshelf,aonportDCCorCITanyonenabledissecurityIf
onportsDCCorCITallforonlyusersprivilegedtoavailableiscommand
shelf.the
are:parametersinputThe
tid andupper-includemayandcharacters,20toupofstringaisTID
"%","+","-",characters:followingtheandnumbers,letters,lowercase
isvalueinitialthecommand,thisofusefirstthetoPrior"."."#",
LT-DDM-2000 The. TID theofbeginningtheatprintedbewill
OSTL1/X.25ofoperationproperForcommands.allforoutput
theinterfaces, TID NE.eachforuniquebemust
1:NOTE
theChanging TID networkthechangenotdoesname)(system
affectdoesbutNSAPthebydeterminediswhichaddress,
reporting.messageTL1proper
2:NOTE
allofTIDsdefaultthechangetorecommendedstronglyisIt
startup.systemsatsubnetworktheinNEs
!
CAUTION:
theChanging TID toNEthistologinsTL1activeallcausewill
activatedbetohavewillNEthistologinsTL1Newdropped.be
value.TIDnewtheusing
11-260 1997December1Issue OC-12DDM-2000

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English