SET-STATE-STS1 3of1Page SET-STATE-STS1
NAME
ChannelsSTS-1ofStateSetset-state-sts1:
FORMATINPUT
set-state-sts1:
Address
:ps=
PrimaryState
;
DESCRIPTION
offandonturntousedisItchannels.STS-1ofstatesthesetscommandThis
channels.specifiedforsignalsmaintenanceandfailuressignalofmonitoringthe
are:parametersinputThe
Address
are:addressesValidchannel(s).STS-1theidentifiesAddress
MainitsinpackscircuitOLIU24-typewithequippedisshelftheIf
are:AddressesunitMainvalidslots,unit
all,m-{1-12,all}
{mb}-{1-12,all}all,
{a,b,c,d}-{1-3,all}.
for:setbecanstatesChannel
cross-arethatinterfacesOC-12withinchannelsSTS-1
interfacesDS3,toconnected
shelfOC-3anfromdroppedarethatchannelsSTS-1
OC-12slotsunitMainitsinOLIUs24-typewithequipped
interfaceDS3orEC-1,OC-3,antointerfacering
ps theofonehavemaywhichstatechanneltheisPrimaryState
values:following
auto theMonitorautomatic.tostatechanneltheSet
conditions.statusoralarmreportnotdobutchannel,
changeautomaticallydetected,issignalgoodaWhen
normalbeginandin-servicetostatechannelthe
conditions.statusandalarmofreporting
nmon reportnotDomonitored.nottostatechanneltheSet
notDochannel.theforconditionsstatusoralarm
issignalgoodaifin-servicetostatechannelthechange
theuntilstatethisinremainwillchannelThedetected.
theuntilorcommandthiswithagainchangedisstate
deleted.ischannelthisinvolvingcross-connection
11-296 1997December1Issue OC-12DDM-2000
To Next Page
Loading...
Need help?
General
