SET-PMTHRES-SECT 2of1Page SET-PMTHRES-SECT
NAME
SectionThresholdMonitoringPerformanceSetset-pmthres-sect:
FORMATINPUT
set-pmthres-sect:[TxPwr1dB=
n
][,TxPwr2dB=
n
][,LaserBias=
n
]
[,Qhsefs=
nn
][,Daysefs=
nnnn
];
DESCRIPTION
andOC-12anofthresholdsperformance-monitoringthesetscommandThis
thresholdofprocessingthedeactivatingandactivatingaswellassections,OC-3
parameters.performanceforcrossings
are:parametersinputThe
TxPwr1dB opticalforthresholddB-1theenables/disablesparameterThis
arevaluesvalidThepower.transmit enabled value)(default
and disabled OLIU21GthetoonlyappliesparameterThis.
pack.circuit
TxPwr2dB opticalforthresholddB-2theenables/disablesparameterThis
arevaluesvalidThepower.transmit enabled value)(default
and disabled OLIU21GthetoonlyappliesparameterThis.
pack.circuit
LaserBias Thethreshold.biaslasertheenables/disablesparameterThis
arevaluesvalid enabled andvalue)(default disabled This.
OLIU23Rand23H23G,21G,thetoonlyappliesparameter
packs.circuit
Qhsefs quarter-hourlyaonSEFSforthresholdthesetsparameterThis
63through0ofrangewithintegeranisparameterThisbasis.
(0)zeroofvalueparameteraEntering10.ofvaluedefaultand
parameter.thisforthresholdingdisablewill
Daysefs basis.dailyaonSEFSforthresholdthesetsparameterThis
aand4095through0ofrangewithintegeranisparameterThis
will(0)zeroofvalueparameteraEntering30.ofvaluedefault
parameter.thisforthresholdingdisable
OC-12DDM-2000 1997December1Issue 11-277
To Next Page
Loading...
Need help?
General
