Lucent Technologies DDM-2000 OC-12 User Manual

SET-TRACE-STS1 3of1Page SET-TRACE-STS1
NAME
CharacteristicsTracePathSTSSetset-trace-sts1:
FORMATINPUT
set-trace-sts1: Address [:EXPTRC=Expectedincomingpathtrace]
[,TRC=OutgoingPathTrace];
DESCRIPTION
thetostringscharacteralphanumericuser-selectableassignscommandThis
signal.STS-1cross-connectedSTSanoffieldstracepathreceiveandtransmit
through"a"and"Z"through"A"letterstheincludecharactersASCIIallowedThe
characters:specialfollowingtheand"9",through"0"numbers"z",
sign)(dollar$sign)(pound#
(ampersand)&sign)(percent%
parenthesis)(close)parenthesis)(open(
(asterisk)*(plus)+
(hyphen)-(pipe)|
bracket)square(close]bracket)square(open[
bracket)(close}bracket)(open{
accent)(grave‘(apostrophe)’
(slash)/(period).
than).(greater>than)(less<
NOTE:
circuitBBG11BatoterminatingpathsSTStoapplicableonlyisfeatureThis
pack.
are:parametersinputThe
Address terminatingpathSONETtheofaddresschannelSTS-1aisThis
assigned.istracepaththewhichforsignal
OC-12):(withinAddressesValid mb-{1-12} R7.0,ReleaseFor
OC-3):(withinAddressesValid {a,b,c,d}-{1-3}
EXPTRC isItmessage.tracepathincomingexpectedthespecifiesEXPTRC
characters.alphanumericlessor62ofstringa
TRC 62ofstringaisItmessage.tracepathoutgoingthespecifiesTRC
characters.alphanumericlessor
OC-12DDM-2000 1997December1Issue 11-319

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English