Lucent Technologies DDM-2000 OC-12 User Manual

SET-FECOM 4of2Page SET-FECOM
communicationenabletotimeothertheandDCC,aover
interface.LANIAOtheover
nsus theofidentificationtheis(NS/US)NetworkSide/UserSide
definemustNEtheonDCCEachNE.theforidentityDCC
NS/UStheWhennetwork.OSItheinidentityNS/USits
active.isalarmanends,bothatsametheisparameter
nsus parametertheiffor,promptednotis Address setis
to lan followingthehavemayNetworkSide/UserSide,
values:parameter
ns toDCCtheofendthisdefines(NS)SideNetwork
networksDDM-2000Forsite.networkabe
valuethisbecanDCCtheofterminationeither
different.isterminationothertheaslongas
page.followingtheonlistedarevaluesDefault
us betoDCCtheofendthisdefines(US)SideUser
eithernetworks,DDM-2000Forsite.usera
longasvaluethisbecanDCCtheoftermination
Defaultdifferent.isterminationothertheas
page.followingtheonlistedarevalues
NS/UStheforsettingsdefaultshowschartfollowingThe
parameter:
dcc-ddcc-cdcc-bdcc-a1+1
Application
nsnsnsnsOLIUs21-type
dcc-d2dcc-d1dcc-c2dcc-c1dcc-b2dcc-b1dcc-a2dcc-a1Videoor0x1
Applications
nsOLIUs21-type nsus nsus us ns us
dcc-m2dcc-m1Rings
Applications
nsusOLIUs23-type
OC-12DDM-2000 1997December1Issue 11-249

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English