Lucent Technologies DDM-2000 OC-12 - Page 1047

Order:Circuit363-206-295 NTP-013
8of7Page1997December1,Issue
LISTEDORDERINBELOWITEMSDO .... TOGODETAILS,FOR
If OLIU21G/21G-U thesetnode,OC-12ininstalledares
theonswitchoption OLIU21G/21G-U thewithagreetos
facility.opticaltheofloss
18. DLP-510
bothInstall OLIU andnodeOC-12thein(OC-3/IS-3)s
both OLIU node.OC-3thein(OC-3/IS-3)s
19. DLP-503
theuseshelf,DDM-2000eachAt
set-fecom:
address :com= enabled ,nsus= ns/us
and(fecom)communicationsfar-endenabletocommand
parameters.(us)Side(ns)/UserSideNetworkset
20.
theofverificationandconnectionsfiberopticalPerform
facility.optical
21. DLP-551
nodesDRIattestlineOC-3/IS-3end-to-endPerform
1).FigureinHandCnodesbetweenexample,(For
22. DLP-552
theusenodes,DRIupgradedtheAt ent-crs-sts1 or
ent-crs-vt1 and"droppropermaketocommands
cross-connections.continue"
23. DLP-549
24. complete.nowisupgradeThe