Lucent Technologies DDM-2000 OC-12 User Manual

NTP-015 363-206-295TurnupSystem:
1997December1,Issue11of4Page
LISTEDORDERINBELOWITEMSDO .... TOGODETAILS,FOR
theUse rtrv-fecom/set-fecom theatcommand
theorDDM-2000 CONFIGURATION-Enter-
Assignment-DCC verify/settoFT-2000theatcommand
allofendeachatparametersSide"Side/User"Network
established.beingspansoptical
8.
1:NOTE
butspecifiedismodetimingexternalorspecifiedismodetiminglineIf
theturnup,shelfOC-12theatavailablenotwasreferencetimingthe
TGS/TG3 forsetprobablyareswitchesoption
runningfree Before.
setbemustmodetimingspecifiedtheestablished,isconfigurationthis
theon TGS/TG3 packs.circuit
2:NOTE
bydonebemustupdateanchanged,issettingswitchoptiontheIf
thedepressingmomentarily UPD/INIT theonbutton SYSCTL theafter
TGS/TG3 reinstalled.arepackscircuit
3:NOTE
theandselectedistimingexternalIf ACTYNE lightedremainsLED
theafter TGS/TG3 theandCITtheusereinserted,ispackcircuit
rtrv-sync system.theofmodeoperationalthechecktocommand
ismodetheIf Holdover ofinstead External thethatcheck,
checkAlsoconnected.arereferencestimingincoming Mode
Switching externaltheandnonrevertive)or(revertive LineDS1
Code/Format settings.switch
DDM-2000onmodetimingSet TGS/TG3 topackscircuit
records.officeororderworkinspecifiedmodetimingthe
DLP-510

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English