Order:Circuit363-206-295 NTP-016
5of5Page1997December1,Issue
LISTEDORDERINBELOWITEMSDO .... TOGODETAILS,FOR
2:NOTE
neworupgradessoftwarereceivewhoUsers SYSCTL packscircuit
orLUC02,(LUC01,logindefaultnewathatfindmayfactorythefrom
newtheofnoneIfsystem.theintoaccessallowtoneededisLUC03)
ofonetryshoulduserthesystem,thetoaccesspermitsloginsdefault
defaultTheATT03).orATT02,(ATT01,loginsdefaultoldthe
DDM-2000.ispassword
newInstall SYSCTLBBG8/BBG8B . DLP-501
10.
NOTE:
theonswitchesbysetpreviouslywerethatParameters OHCTLBCP1
and SYSCTLBBG5 newtheoncommandssoftwarebysetare BCP4
OHCTL and SYSCTLBBG8/BBG8B controllers: Shelf,TID,
parameters(NS/US)SideSide/UserNetworkCO/RT, .
theUse set-ne and set-fecom settocommands
controllers:newtheonparametersthese Shelf,TID,
(NS/US)SideSide/UserNetworkCO/RT, If.
duringdefaultfromresetbetohaveparametersother
ofsectionReportsandCommandstheuseupgrade,this
theofdescriptionaformanualthis set- commands.
beingshelvesallfor2StepfromprocedurethisRepeat
performed.alreadynotifupgraded,
11.
To Next Page
Loading...
Need help?
General
