NTP-020 363-206-295TurnupSystem:
1997December1,Issue8of2Page
LISTEDORDERINBELOWITEMSDO .... TOGODETAILS,FOR
2.
NOTE:
theofparametersSideSide/UserNetworkThe set-fecom:
Forspans.opticaltheofendeachatoppositesetbemustcommand
1.Figureseeexample,
theUse rtrv-fecom/set-fecom tocommand
eachatparametersSide"Side/User"Networkverify/set
established.beingspanopticalofend
3.
1:NOTE
butspecifiedismodetimingexternalorspecifiedismodetiminglineIf
theturnup,shelfatavailablenotwasreferencetimingthe TGS/TG3
forsetprobablyareswitchesoption
runningfree
end-to-theBefore.
onsetbemustmodetimingspecifiedtheestablished,issystemend
the TGS/TG3 packs.circuit
2:NOTE
bydonebemustupdateanchanged,issettingswitchoptiontheIf
thedepressingmomentarily UPD/INIT theonbutton SYSCTL theafter
TGS/TG3 reinstalled.arepackscircuit
3:NOTE
theandselectedistimingexternalIf ACTYNE lightedremainsLED
theafter TGS/TG3 theandCITtheusereinserted,ispackcircuit
rtrv-sync system.theofmodeoperationalthechecktocommand
ismodetheIf Holdover ofinstead External thethatcheck,
checkAlsoconnected.arereferencestimingincoming Mode
Switching externaltheandnonrevertive)or(revertive LineDS1
Code/Format settings.switch
To Next Page
Loading...
Need help?
General
