Lucent Technologies DDM-2000 OC-12 User Manual

NTP-032 363-206-295OrderCircuit:
1997December1,Issue27of20Page
LISTEDORDERINBELOWITEMSDO .... TOGODETAILS,FOR
23.
NOTE:
ofswitchmanualaifoccurwilltransmissiontheonhitadditionalAn
the TSI necessary.ispackcircuit
theidentify2,NodeAt TSIBCP2 thewithpackcircuit
lighted ACTIVE necessary,Iffaceplate.theonLED
aperform switch-tsi:pri=
manual tocommand
themake TSIBCP2 theinpackcircuit TSI-2 theslot
pack.circuitactive
unseat2,NodeAt OLIUMAIN-B-124. .
remove2,NodeAt TSIBCP2 theinpackcircuit TSI-1
slot.
25.
unseat2,NodeAt TGS/TG3 theinpackcircuit TIMING-1
slot.
26.
27.
NOTE:
The FAULT theonLED OHCTL theandflashwill MJ bewillLED
upgraded.isendothertheuntillighted
Replace OHCTLBCP1 withpackcircuit OHCTLBCP4
pack.circuit
DLP-518

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English