Lucent Technologies DDM-2000 OC-12 - Page 1218

Clearing:Trouble363-206-295 TAP-101
9of7Page1997December1,Issue
11.
NOTE:
orslotswrongtheintoinsertedpackscircuitbycausedbemayAlarm
theonsettingsswitchwrongorinvalidby TGS/TG3 packs.circuit
slots?correcttheininstalledpackscircuitAre
If YES toproceedthen, 14Step .
If NO withcontinuethen, 12Step .
(switchesoptioncheckslots,wrongfrompackscircuitRemove12. DLP-510)
slots.correcttheintopackscircuitreinstalland
13. PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
14.
!
CAUTION:
isswitchingprotectionthatensurepackscircuitremovingWhen
lightedthewithoutpackcircuittheremoveAlso,available.
ACTIVE
first.LED
(settingsswitchCheck rtrv-sync theoncommand) TGS/TG3 circuit
ifcheckreplaced,beenhaspackcircuittheIfsettings.correctforpacks
replaced.waspackcircuitthebeforeweretheyassamethearesettings
pack.circuitcompaniontheassamethesetareswitchestheifcheckAlso
Reference: DLP-510
correct?settingsswitchAre15.
If YES dothen, TAP-103.
If NO withcontinuethen, 16Step .
(Usesettings.correctthetosettingsswitchChange16. sw-sync command
aresettingsswitchIfpack.)removingbeforepackcircuitothertoswitchto
listequipmenttheupdatepreviously,weretheywhatfromchangedbeto
thedepressingmomentarilyby UPD/INIT theonbutton SYSCTL theafter
reinstalled.ispackcircuit
17. PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.