TAP-102 363-206-295ClearingTrouble:
1997December1,Issue12of6Page
thetogoandbelowBTableinLEDflashingawithpack(s)circuittheFind8.
procedure.orstepindicated
LEDFlashingWithPack(s)CircuitB.Table
ToGoPackCircuit
3DS3/3STS1E 9StepPROTN)or(SRV
TGS/TG3 11Step
OHCTL 26Step
7)Release(TARPOLIU TAP-120
protectiononflashingisLEDIfprotection.toserviceSwitch9.
3DS3/3STS1E fromsignalDS3/EC-1incomingbadofreporttroubleissue,
protectiononflashingnotisLEDIfpoint.cross-connectDSX-3/STSX
3DS3/3STS1E servicereplace, 3DS3/3STS1E [packcircuit DLP-518].
10. PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
Check11. TGS/TG3 andcodinglineproperforswitchesoptionpackcircuit
(settingsformatframe rtrv-sync incomingcheckfound,troublenoIf).
troubleissuebad,aresignalsreferencetimingIfsignals.referencetiming
withfoundtroublenoIfsignal(s).referencetimingincomingbadofreport
replacereferences,timing TGS/TG3 packs.circuit
Reference: DLP-518
12. PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
13.
NOTE:
atoperformedbeingisinstallationprogramaIf SYSCTL fartheat
thefornormalisitend, FAULT near-endtheonLED OHCTL flashto
theand MJ and ACTYNE aisthereIfPanel.UsertheonlighttoLEDs
MJ Youindicated.istroubleprogram,thereceivingendtheatalarm
done.beingisinstallationprogramaifcheckshould
thetoupgrade)(programdownloadedbeinggenericsoftwarenewIs
SYSCTL terminal?endfartheat
If YES then, PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
If NO withcontinuethen, 14Step .
ofindicationanythereisreport,alarmIn14. OLIU endnearattroublefiberor
assuchendfaror FERFOC12inc. message?alarm
If YES withcontinuethen, 15Step .
If NO toproceedthen, 17Step .