TAP-102 363-206-295ClearingTrouble:
1997December1,Issue12of8Page
theIs22. FAULT flashing?stillpackcircuitaffectedtheonLED
If YES withcontinuethen, 23Step .
If NO then, PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
procedure.thisrepeatandCITaObtain23.
24. PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
toRefer25. DLP-501 replaceand SYSCTL terminal.near-endat
theIs26. FAULT theonLED OHCTL flashing?stillpackcircuit
If YES withcontinuethen, 27Step .
If NO then, PROCEDURETHISCOMPLETEDHAVEYOUSTOP. .
resetterminal,far-endAt27. SYSCTL reseatingandunseatingby SYSCTL or
theandCITausingby reset Ifperformed.alreadynotifcommand,
FAULT toreferreset,aafterflashingstillisLED DLP-501 replaceand
SYSCTL anIfterminal.far-endat OHCTL theandpresentis FAULT LED
theafterflashingstillis SYSCTL thereplacereplaced,is OHCTL
[DLP-518 exists.stilltroubleifother,thethenandendoneatfirst]
28. PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
theIs29. FAULT theonlightedLED SYSCTL?
If YES withcontinuethen, 30Step .
If NO toproceedthen, 37Step .
Remove30. SYSCTL settings.switchcheckand
Reference: DLP-510
correct?settingsswitchAre31.
If YES toproceedthen, 33Step .
If NO withcontinuethen, 32Step .
settings.correcttoswitchesSet32.
Reference: DLP-510
To Next Page
Loading...
Need help?
General
