Lucent Technologies DDM-2000 OC-12 User Manual

Clearing:Trouble363-206-295 TAP-102
12of11Page1997December1,Issue
46.
NOTE:
orslotswrongtheintoinsertedpackscircuitbycausedbemayAlarm
theonsettingsswitchwrongorinvalidby TGS/TG3 packs.circuit
slots?correcttheininstalledpackscircuitAre
If YES toproceedthen, 49Step .
If NO withcontinuethen, 47Step .
(switchesoptioncheckslots,wrongfrompackscircuitRemove47. DLP-510)
slots.correcttheintopackscircuitreinstalland
48. PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
49.
!
CAUTION:
isswitchingprotectionthatensurepackscircuitremovingWhen
lightedthewithoutpackcircuittheremoveAlso,available.
ACTIVE
first.LED
circuittheIfsettings.correctforpackscircuittheonsettingsswitchCheck
weretheyassamethearesettingsifcheckreplaced,beenhaspack
thesetareswitchestheifcheckAlsoreplaced.waspackcircuitthebefore
pack.circuitcompaniontheassame
Reference: DLP-510
correct?settingsswitchAre50.
If YES dothen, TAP-103.
If NO withcontinuethen, 51Step .
(Usesettings.correctthetosettingsswitchChange51. )sw-( tocommand
toaresettingsswitchIfpack.)removingbeforepackcircuitothertoswitch
bylistequipmenttheupdatepreviously,weretheywhatfromchangedbe
thedepressingmomentarily UPD/INIT theonbutton SYSCTL theafter
reinstalled.ispackcircuit
52. PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English