Lucent Technologies DDM-2000 OC-12 User Manual

TAP-111 363-206-295ClearingTrouble:
1997December1,Issue2of2Page
withequippedshelfIs7. BBG8 or SYSCTLBBG8B pack?circuit
If BBG8 withcontinuethen, 8Step .
If BBG8B toproceedthen, 11Step .
potential?sametheatfeedersreturnbatteryandgroundframeAre8.
If NO withcontinuethen, 9Step .
If YES toproceedthen, 11Step .
batteryandgroundFramereturn.batteryorgroundframeinTrouble9.
sametheto(traceablepotentialsametheaboutatbeshouldreturn
problem.correctandFindsource).
10. PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
11.
NOTE:
reseatingandUnseating SYSCTL aperformspackcircuit reset
program.softwaretherestartswhichprocedure
reseatandUnseat SYSCTL useorpackciruit reset notDocommand.
press UPD/INIT pushbutton.
cleared?troubleIs12.
If YES then, PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
If NO withcontinuethen, 13Step .
13.
!
CAUTION:
theReplacing SYSCTL theonmemoryinternaltheupdatinginvolves
pack.circuit
theReplace SYSCTL (DLP-501).
14. PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English