Lucent Technologies DDM-2000 OC-12 User Manual

TAP-112 363-206-295ClearingTrouble:
1997December1,Issue15of14Page
Note AddressSource fibersopticalCheckfailure.channelDCCof
thethroughconnected AddressSource noIfprocedures.localper
near-endreplacefound,trouble OLIU far-endthenfirst OLIU.
Reference: DLP-518
43. PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
andCITUse44. reset resettocommand SYSCTL unplugorendneartheat
thereseatand SYSCTL.
theIs45. FAULT theonLED OHCTL (flashingstillpackcircuit DCCsection
failedchannel )?
If YES withcontinuethen, 46Step .
If NO then, PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
andCITusepossible,If46. rlgn terminalfar-endthetoinlogtocommand
(DLP-517 theuseand) reset resettocommand SYSCTL end.fartheat
theIs47. FAULT theonLED OHCTL (flashingstillpackcircuit DCCsection
failedchannel )?
If YES toproceedthen, 52Step .
If NO then, PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
48.
NOTE:
thereseatingandUnseating SYSCTL aperforms reset procedure
program.softwaretherestartswhich
reseatandUnseat SYSCTL depressnotDopack.circuit UPD/INIT button.
theIs49. FAULT flashing?stillpackcircuitaffectedtheonLED
If YES withcontinuethen, 50Step .
If NO then, PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
procedure.thisrepeatandCITaObtain50.
51. PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English