Lucent Technologies DDM-2000 OC-12 - Page 1326

DLP-502 363-206-295
1997December1,Issue12of12Page
firstInstall TGS/TG3 in TIMING slot 1.
Response: FAULT theonLED TGS/TG3 lights. ACTIVE lights.LED
FAULT seconds.15aboutafteroffgoesLED
6.
NOTE:
twotheonsamethesetnotareswitchesoptionmodetimingtheIf
TGS/TG3 thepacks,circuit FAULT theonlightedremainwillLED
installed.packcircuitsecond
(protection)secondInstall TGS/TG3 in TIMING slot 2.
Response: FAULT onLED TGS/TG3 seconds15aboutforlights
off.goesthen ACTIVE off.remainsLED
DS1?externaltosetmodetimingIs7.
If YES withcontinuethen, 8.Step
If NO then, PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
theIf8. ACTYNE commandCITtheuseon,remainsPanelUsertheonLED
rtrv-sync issystemtheofmodeoperationalthethatverifyto
External ismodeoperationaltheIf. Holdover timingDS1thecheck,
references.
9. PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.