Lucent Technologies DDM-2000 OC-12 User Manual

363-206-295 DLP-508
8of7Page1997December1,Issue
theatloopbackfibertheperformed,beingaretestslocalIf1.FigureSee21.
near-end OLIU performed,beingaretestsend-to-endIfplace.inbemust
thewithassociatedpointcross-connectSTSXorDSX-3far-endtheat
thefromcordpatchaconnecttested,beingDDM-2000 OUT thetojack IN
tested.betochannelDS3theforjack
connectDDM-2000,near-endthewithassociatedcross-connectiontheAt22.
thetosettestDS3the IN and OUT undercircuitthewithassociatedjacks
test.
transmission.error-freefortesttosettestDS3theUse23.
free)?(errorsuccessfultesttheWas24.
If YES withcontinuethen, 25Step .
If NO toproceedthen, 34Step .
circuitprotectionisandgrouptheonplacedbeingservicefirstthethisIs25.
installed?pack
If YES withcontinuethen, 26Step .
If NO toproceedthen, 30Step .
servicetheUnseat26. 3DS3 test.undercircuitthewithassociatedpackcircuit
set.testDS3thewithtesttransmissionDS3theRepeat27.
free)?(errorsuccessfultesttheWas28.
If YES withcontinuethen, 29Step .
If NO toproceedthen, 34Step .
theReseat29. 3DS3 test.undercircuitthewithassociatedpackcircuit
Removetest.transmissionDS3thepassedhastestundercircuitDS3The30.
cross-connections.thefromcordspatchloopingthe
thedepressmomentarilyDDM-2000,far-end)the(andnear-endtheAt31.
UPD/INIT theonbutton SYSCTL theupdateto SYSCTL.
betocircuitsDS3additionalanyfor21StepfromprocedurethisRepeat32.
tested.
33. PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English