Lucent Technologies DDM-2000 OC-12 User Manual

363-206-295 DLP-527
16of15Page1997December1,Issue
downloadtheIf30.
failsandstarts and(Alt-F2)termexitprogress,itsduring
session.termnewarestartthen
thereseatandUnplug31. SYSCTL theholdandpushimmediatelyand
SELFE and UPD/INIT auntiltimesametheatbuttons P theinappears
IDFE seconds).15approximately(takesdisplay
torefercomplete,notdoesstilldownloadtheIf
TAP-116Clearing:Trouble .
32. PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
theUse33. rtrv-alm information.statusandalarmdisplaytocommand
"messagestatusDoes34. mismatchcodedormant/exec theinappear"
shelf?thisforreport
If NO then, PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
If YES withcontinuethen, 35Step .
35.
NOTE:
incopydormantaasloadedbeenhasdownloadedyousoftwareThe
Thesoftware.executingthestillissoftwareoriginalTheshelf.this
"apply dormanttheinstalltoshelfthisatusedbemustcommand"
"theWhencopy.executinganassoftwareofcopy apply command"
aistherelater,or5.1Releasefromupgradeanduringexecutedis
begins.installationcopydormantthebeforedelay30-minute
"theWhen apply fromupgradeanduringexecutediscommand"
"aspecifynotdoyouifreleases,laterto7.0Release
time and"
"
date thebeforedelay15-minutedefaultaisthereparameter,"
thebegins,installationtheOncebegins.installationcopydormant
minutes.10approximatelyininstallediscopydormant
manualthisof1VolumeofsectionReports"and"CommandstheSee
"7.0Releasetheofdescriptionafor apply "Thecommand." apply"
theacrossdownloadsoftwarethecoordinatetoyouallowscommand
network.
theusetogoingyouAre apply theinstalltotimethisatcommand
software?ofversiondormant
If YES withcontinuethen, 36Step .
If NO then, PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English