DLP-541 363-206-295
1997December1,Issue8of4Page
8.
NOTE:
The rtrv-secu: theretrievescommand SecurityPort
ReportConfiguration portDCCandCITprovidesreportThis.
Reports"and"CommandstheSeeinformation.timeoutandsecurity
theofdescriptionaformanualthisofsection rtrv-secu:
format.command
theUse rtrv-secu: theobtaintocommand SecurityPort
ReportConfiguration andsecurityportCIT/DCCthenoteand
information.timeout
9.
1:NOTE
The set-secu: enabledissecuritywhetherdeterminescommand
usinginterfaceDCCandCITeachonstatelockoutinordisabledor
cit-{1,2,all}].or[dcc-alladdressesportDCCand/orCITmoreorone
porteachforperiodtimeoutthespecifytousedalsoiscommandThis
inactiveanbeforeminutes,intime,theisperiodtimeoutTheaddress.
and"CommandstheSeeterminated.automaticallyissession
commandtheofdescriptionaformanualthisofsectionReports"
example,Forformat. set-secu:cit-1:sec=enabled enables
port.CITfronttheonsecurity
2:NOTE
loginvalidaaddress,portDCCorCITaforenabledissecurityWhen
port.thatthroughsystemtheaccesstoenteredbemustpasswordand
theaccesscanuserprivilegedaonlystate,lockoutinissecurityWhen
port.CIT/DCCoutlockedthethroughsystem
3:NOTE
customeraonlocatedterminalremoteahavethatapplicationsFor
atinterfaceDCCtheonsecuritydisabletowantmayyousite,premise
centraltheinterminaltheatusertheallowsThisterminal.remotethe
awithoutterminalremotethetoDCC)the(viaremotelylogintooffice
towantmayyouoffice,centraltheinterminaltheAtlogin/password.
remotetheatuserathatmeansThisDCC.theonsecurityenable
the(viaremotelylogintologin/passwordvalidahavemustterminal
office.centraltheatterminalthetoDCC)
theUse set-secu: CITeachonsecuritydisableorenabletocommand
required.asperiod,timeoutcorrespondingthespecifyandportDCCand/or
To Next Page
Loading...
Need help?
General
