DLP-548 363-206-295
1997December1,Issue4of2Page
Monitor
Far End
Monitor
Near End
MonitoringTestLineOpticalEnd-to-End1.Figure
PanelUsertoCITconnectlocation,testnear-endAt2. CIT andconnector
session.establish
Reference: DLP-521
3.
!
CAUTION:
The
init-pm:reg=all
daycurrentall(clears)initializescommand
storageperformance-monitoringquarter-hourcurrentalland/or
registers.
NOTE:
thedoingfromyouprohibitprocedureslocalIf init-pm:reg=all
theUse5.Stepinfollowingtheperformmayyoucommand,
rtrv-pm-line monitoringperformancelinetheobtaintocommand
theonreadingsthenotereport,status Today waitreport,theinline
nobeshouldTherereport.anotherobtainthenandseconds20
report.firstthefromreadingsinchange
commandtheEnter init-pm:reg=all allowed.if,
seconds.20Wait4.
To Next Page
Loading...
Need help?
General
