363-206-295
Operations Interfaces
Issue 1 December 1997 6-7
The
NCR
*
3170 computer and the AT&T
Safari
†
computer have a
built-in modem and meet the modem requirements.
The following stand-alone modems meet the modem requirements and can be
used with the DDM-2000 OC-12 system. This is not an exhaustive list of
compatible modems:
■
Paradyne
†
2224-CEO modem (at 1200 and 2400 baud)
■
Paradyne
2224 modem (at 1200 and 2400 baud)
■
Paradyne
4024 modem (at 1200 and 2400 baud)
■
Paradyne
2296 modem (at 4800 and 9600 baud)
■ Hayes
‡
V-series
Smartmodems
■
Penril
§
Alliance V.32 modem.
Remote Access Using the Data Communications
Channel (DCC) 6
The DDM-2000 OC-12 system supports CIT remote access from the local
terminal to a remote system using the data communications channel (DCC) over
OC-N interfaces or the IAO LAN. The DDM-2000 OC-12 system supports one
incoming remote login session and one outgoing login session over the DCC at a
time. For example, a local user can gain remote access to a remote DDM-2000 in
the same subnetwork at the same time a remote user at another DDM-2000 in the
subnetwork can gain remote access to the local system. CIT remote login is also
supported in multi-vendor subnetworks, but only between DDM-2000 Multiplexers
(or from FT-2000 to DDM-2000).
Operations Interworking (OI) also allows remote logins between DDM-2000 and
the
SLC
-2000 Access System and from the FT-2000 OC-48 Lightwave System to
other Lucent 2000 Product Family systems in the same subnetwork.
* Trademark of NCR Corporation.
† Registered trademark of AT&T.
‡ Trademark of Hayes Microcomputer Products, Inc.
§ Registered trademark of Penril Corporation.