Issue 1 December 1997 8-1
8
Administration and Provisioning 8
Overview 8
This section describes the administration and provisioning features of the
DDM-2000 OC-12 Multiplexer. The following topics are described in addition to
the administration and provisioning features:
■ Multiplexing and mapping
■ Cross-connection provisioning for ring networks
■ Listing of provisionable parameters with their ranges and default values.
Administration 8
Version Recognition 8
The DDM-2000 OC-12 Multiplexer provides automatic version recognition of all
hardware, firmware, and software installed in the system. Each circuit pack
CLEI
*
code, equipment catalog item (ECI) code, apparatus code and series number, and
serial number is stored on the circuit pack and is accessible by the system
controller via the craft interface terminal (CIT). Circuit packs with socketed devices
also report those devices and program identification (PID) codes. The system
controller (SYSCTL) also reports the software version for the system. Refer to the
rtrv-eqpt command in Section 11, "Commands and Reports."
* COMMON LANGUAGE is a registered trademark and CLEI, CLLI, CLCI, and CLFI are
trademarks of Bell Communications Research, Inc.
To Next Page
Loading...
Need help?
General
